York compressor mount for 1FZ-FE
Converting a York AC Compressor to serve as a high output on-board-air source is a common modification done by off-roaders. Now we have a bracket and pulley kit that allows ownders o '93-'97 Land Cruiser 80 Series outfitted with the 1FZFE motor to do the same.
The 2 belt drive pulley on the water pump is replaced by a custom machined pulley that has provision for three belts. The third belt drive is used to turn the York compressor mounted to a custom bracket.
The bracket is bolted to the motor using supplied hardware. The bracket features slotted holes that fit the standard York Mounting bolt pattern. The slotted holes allows for tensioning of the belt.
Note: On certain 1FZFE motors the PAIR valve (part of the emissions system) needs to be relocated. there is currently no kit available to do this, so the relocation of this valve is up to the customer.